Dome Kits and Prices
preview005022.jpg
preview005021.jpg
preview005020.jpg
preview005019.jpg
preview005018.jpg
preview005017.jpg
Steel T-Bar Geodesic Domes
Dome Kits geodesic T-bar frame kits are 19' and 24' diameter with 12' high ceilings. This is Dome Kits smallest dome kits at 800 square feet of floor space. The size of most one bedroom apartments or large two car garages.

Dome Kits uses the 4 frequency icosahedrons geodesic frame because they are flat at the hemisphere or foundation. These structures are light gauge steel T-bar and rigid foam insulation board cut in triangles to match the five different triangles.

They can be covered on the outside with synthetic stucco or elastomeric roofing paint. You can purchase these products at most any hardware store or drywall supply. The total cost for materials is under $1500 depending on your options.
You can use a cordless drill or screw gun to screw the frame together. A pair of tin snip scissors to cut the light gauge steel T-bar ceiling grid. A sharp steak knife to cut the rigid foam insulation board and a paint roller with 6' handle for the roofing material.
Any glass shop will cut your triangle windows or you can cut them yourself from unbreakable clear plastic sheets (storm windows). You can also frame in any conventional rectangular windows and frames anywhere in the geodesic structure.
Dome Kits owners options. If you would like the steel T-bar geodesic structure cut and lettered and the rigid insulation foam cut and lettered and packaged for delivery there will be a manufacturing cost of 1500$ (all the instruction will come with the package). All dome kits are fabricated and assembled at our facility with all door and window opening framed to you request.
You can not build an insulated structure with finished interior and exterior in any shape for less. You can not use better materials than steel, rigid foam and synthetic paints.
Dome Kits is part of the Spherical Designs Organization. There are many different roof designs and prefab structures to choose from manufactured from light gauge steel or wood. Find a picture or idea you like and we can discuss your needs in greater detail.
preview005016.gif
Free Dome Kits - Your introduction to dome building - Low cost housing
This is Dome Kits not for profit organization dome kit. We will send you all the diagrams, pictures and measurements to build your spherical geodesic structure for free. This is the most affordable housing kit available in any shape with finished interior and exterior insulated panels.
The floor system can be built of concrete, wood or steel and should cost about 500$ for any option of materials. If you would like a floor system prefabricated for your geodesic structure from wood or steel this would be a $500 fabrication cost.
preview005015.gif
     Dome Kits - Prices
Light Gauge Steel or Wood
preview005014.gif
preview005013.jpg
preview005012.jpg
preview005011.jpg
preview005010.jpg
preview005009.jpg
preview005008.jpg
The advantage of using light gauge steel is becoming more apparent every day in the residential housing industry. Dome Kits has been involved with the commercial steel stud industry for over thirty years. High occupancy commercial structures have required the use of light gauge steel studs over wood do to their fire rating, structural integrity over their life and pest resistance. Screws have always been a superior connection over nails and coated steel and screws are not susceptible to moisture, rust or mold. The price of wood has continued to rise as the quality has become poorer. The light gauge steel does not warp or twist so there is less waste. Steel studs are lighter and less labor intensive than wood. For these reasons Dome Kits can offer the same prefab spherical and geodesic housing kits it has offered in wood for the same price.
Dome Kits continues to offer superior engineering design and lighter more user friendly construction methods. Both the wood and steel connections have compound angles cut which is more time consuming to manufacture but offers a stronger and more accurate connection to nail or screw the shear panel (plywood). Proper nailing or screwing of the plywood shear panel is the most important pat of any wood structure, dome or rectangular. In the areas the building codes are enforced the inspectors check for proper nailing or screwing. Less screws are require than nails do to superior holding power. For this reason Dome Kits never uses OSB or particle board plywood on the exterior of their geodesic dome structures.
Dome Kits continues to use the 4 frequency icosahedrons geometry for all its geodesic dome structures. The higher frequency is inherently stronger on domes over forty feet in diameter. There is a great circle or horizontal level line at the hemisphere which make the connection to the foundation easier and stronger. The national building code requires a 6" wall space for R-19 fiberglass insulation. Dome Kits recommends spray-on foam for our wood domes for a higher R-value, moisture barrier and added structural strength at the same cost as fiberglass bat insulation. Our steel dome kits come with rigid foam insulation with an R-value of 25 or higher.
Dome Kits 30' diameter 4 frequency dome has small triangles under 4' tall. The plywood is easy to cut and you need 2' pieces to fill in your triangles. There are 5 different triangles. you can save some money if you cut the triangles and small backing.

2x6 geodesic wood frame -5,800$ - dome frame backing - 1,600 - 5/8 plywood triangles - 4,200$
Dome Kits 40' diameter 4 frequency dome has triangles 5' tall and proper backing is more critical than the 30' dome. This is the most popular size with 1200 sq.ft on the bottom floor and 1100 sq.ft on the second floor. There is no addict space in a dome structure that is one of the big advantages to the dome truss.

2x6 wood frame with interior backing - 8,200$ - 3/4" plywood triangles - 5,300$
Dome Kits 50' 4 frequency dome has the second level triangles coming across above door and window header height and the use of the ten sided option that is popular on the smaller domes is not usually requested. With 25' high ceilings and a total of 3500 sq, ft we are starting to reach the limit of wood constructed dome structures.

2x6 wood geodesic frame and plywood backing - 10,750$ - 3/4" plywood triangles - 10,800$
Dome Kits 60' 4 frequency geodesic dome should be made of steel. The strut length and connection in wood are losing their structural abilities to carry the load. the 4x8 sheet of plywood no longer reaches all three sides of the triangle. This is where our steel frames are superior. With 30' high ceilings and 5500 sq.ft.

 8" steel I-beam geodesic dome truss - 32,000$ - 3/4" exterior plywood sheathing -15,000$
preview005007.gif
preview005006.jpg
Geodesic Structures
Dome Kits
Spherical Structures
Steel Structures
Building Services
Prefab Structures
Design Engineers
Fiberglass Designs
Electric Vehicles
Electric boats
Dome Kits
plans & services
HOME
owners options
Dome Kits
4V steel T-bar
Dome Kits
3V greenhouse
light gauge steel
Dome Kits
compound angle
connection
Dome Kits
steel connector
Dome Kits
kits & prices
preview005005.gif
construction
diagrams
advanced
materials
Dome Kits
eco links
preview005004.gif
preview005003.gif
preview005002.jpg
DOME KITS
HOME
owners
options
compound angle connection
Dome Kits construction
diagrams
Dome Kits
kits & prices
Dome Kits
advanced
materials
Dome Kits
ecological links
.info
preview005001.gif
Dome Kits
4V steel T-bar
Dome Kits
3V greenhouse
light gauge steel
Dome Kits
Dome Kits
steel connector
Dome Kits
plans & services
1-704-701-5331
info@sphericalstructures.com